Ridgid Pipe Threader Groovers
Shop for your new Ridgid pipe threader machine today! At Total Tools, we carry a selection of Ridgid threading machines in 3-50mm, -75mm, and -100mm, Ridgid threading machine dies, stands, and more.
What are Ridgid pipe threader machines?
Ridgid pipe threading machines are machines that are used to cut threads onto pipes. They are often used in plumbing and piping applications to create threads that allow pipes to be connected or to fittings such as couplings, elbows, and tees.
How to use a Ridgid pipe threader machine?
To use a Ridgid pipe threading machine, follow these steps:
- Secure the pipe in the chuck of the machine. Make sure that the pipe is held firmly in place and will not rotate or move while the machine is running.
- Adjust the dies to the correct size for the pipe you are threading. The dies are the cutting tools that create the threads on the pipe.
- Turn on the machine and allow it to come up to full speed.
- Slowly feed the pipe into the dies while turning the chuck by hand. As the pipe enters the dies, it will begin to be cut.
- Continue feeding the pipe until the desired length of threads has been cut.
- Turn off the machine and remove the pipe from the chuck.
- Inspect the threads on the pipe to ensure that they are smooth and free of burrs or defects.
It is important to use caution when operating a pipe threading machine, as they can be dangerous if used improperly. Make sure to follow all safety guidelines and wear appropriate protective equipment when using these machines.