Includes

• 1 x UNIMIG U12001K VIPER 180 AC/DC TIG/STICK Welder
• 1 x UNIMIG UM-H-CHAOS Chaos Automatic Welding Helmet with True Colour Lens
• 1 x UNIMIG UM-S-TG1L ROGUE TIG Welding Gloves
• 1 x UNIMIG U42005 T2/T3W Consumable Starter Kit

UNIMIG U12001K VIPER 180 AC/DC TIG/STICK Welder

A perfect fit for the home workshed or the professional workshop, get the entire weld cycle on a 10A machine. The VIPER 180 AC/DC Mk II now comes in a smaller case for even greater flexibility.

Key Features

• AC/DC High-Frequency TIG
• Pulse TIG Function
• 10 AMP Plug
• Foot Control Ready
• 2T/4T Torch Modes
• Remote Control Module

Extra Features

• High-frequency AC/DC TIG lets you weld every material effortlessly
• Connect a foot pedal to the machine for extra versatility and convenience
• Use the pulse TIG features for maximum heat control
• Inverter technology: Not every inverter is made equal. With UNIMIG's ever-evolving, state-of-the-art IGBT Inverter technology, you get better performance, better efficiency, and better reliability.
• AC/DC: Weld every kind of metal. With the ability to run on an Alternating Current, you’re able to weld aluminium as effortlessly as mild and stainless steels.
• High-frequency TIG: Maximise your results from start to finish. A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre- and post-gas and up and down slope parameters.
• Foot control ready: The perfect accessory, easily adjust your amperage to suit every weld as you go without disrupting your torch movement.
• 10A plug: Plug in and play. The 10A plug can be used on any domestic outlet, so it’s perfect for the DIY home handyman or the professional welder looking to take it anywhere.
  
  • 2T / 4T / SPOT: Easily swap between torch modes so you stay comfortable no matter the length of the weld.
  • 2T: (two touch) means you need to hold the trigger down on your torch while you weld. Releasing the trigger will end the weld.
  • 4T: (four touch) means you only need to press the trigger to ignite the arc and the torch will continue to weld until you press it again to turn it off.
  • SPOT: a series of consecutive and evenly timed arcs that work well if you want perfectly even tacks and small welds.
• Pulse TIG: Minimise the heat input without compromising on any of the penetration. Alternating between a peak and base current reduces the amount of heat input and focuses the arc, perfect for sheet metals and out-of-position welding.
• Pulse Hz range: Adjust your pulse to your preferences. Speed the pulsing up for thinner metals, or slow the pulse down to give you a better weld profile on thicker materials.
• Pulse percentage: Tweak your pulse settings to perfection. You decide how long your pulse will spend at the peak and base of each cycle. The more time spent in the peak, the more penetration you’ll get.
• Balance control: Strike the perfect balance between cleaning and penetration. The AC Balance lets you choose the optimal amount of time spent in the positive and negative parts of an AC cycle for your weld.
• AC Hz range: Fine-tune how fast your AC cycles every second. Turn your frequency up for a thinner weld, or turn it down to achieve a flatter bead.
• Arc force: Keep your arc stable for the whole weld. The arc force works to detect any short circuits in the weld and increases the current to prevent the arc from cutting out or the electrode from sticking.
• Anti stick: Never stick an electrode again. When the machine detects sticking, Anti stick will kick in, shutting off the current to keep the electrode from sticking.

Welds

• Aluminium
• Magnesium
• Zinc Alloys
• Steels
• Stainless
• Cast Iron
• Bronze
• Copper

TIG Specifications

• TIG Function Type: AC/DC H/F TIG & AC/DC PULSE
• TIG Welding Current Range: 5 - 180A
• TIG Duty Cycle @ 40ºC: 15% @ 180A
• TIG Welding Thickness Range: 1mm - 8mm

AC/DC TIG Settings

• Pre Gas: 0.1-3.0s
• Start AMP: 5-180A
• UP Slope: 0-10s
• Peak AMP: 5-180A
• AC Square Wave: 20-250Hz
• AC Balance Control: ±10
• Down Slope: 0-15s
• Finish AMP: 5-180A
• Post Gas: 0.5-15.0s
• Pulse Frequency: 0.2-200Hz
• Pulse Width: 10-90%
• Spot: 0.5-10s

Specifications

• Voltage: 240V Single Phase
• Supply Power: 10 AMP
• Rated Input Power: 5.2kVA
• leff: 8.9
• Rated Output: 5-180A
• No Load Voltage: 7-55V
• Protection Class: IP21S
• Insulation Class: F
• Minimum Generator: 9kVA
• Dinse Connector: 35/50
• Standard: AS/NZ60974-1
• Weight: 11kg

UNIMIG UM-H-CHAOS Chaos Automatic Welding Helmet with True Colour Lens

Features

• 4 Arc Sensors maintain constant sensing and automatically switches the helmet from light to dark and back again
• Enhanced Viewing Area offers a larger viewing area for the operator. This larger viewing area enhances the operators view of the welding area
• True Colour High Definition Filter Technology is a feature that greatly improves the optics allowing the user to see a full spectrum of colours. It also helps to alleviate eye fatigue making it safer for extended periods of welding
• Lightweight Design makes wearing the welding helmet more comfortable for the operator
• Grind Mode allows the operator to switch the helmet from the welding mode into a fixed shade for grinding. This function removes the need for the operator to change visors and to simply use the welding helmet for grinding when required.
• Shade Control Automatic Welding Lens allows the operator to switch between variable welding shades from 9-13. The switching speed of the lens is a very fast 0.08m/s from light to dark
• TIG Compatible with a minimum of 3 Amps

Specifications

• Filter dimension: 110mm x 90mm x 9mm
• View size: 100mm x 60mm
• Classification: 1/1/1/2
• Sensors: 4
• Light state: 4
• Dark state: 9-13
• Power control: Fully automatic
• Shade control: External
• Switching time at 23 ̊C: 0.08ms
• Time from dark to light: 0.1s-0.9s, digital control
• Grinding function: External
• Operation temperature: -10 ̊C to 65 ̊C
• Storing temperature: -20 ̊C to 85 ̊C
• Power supply: Solar cell & CR2450 Replaceable Lithium battery
• Certifications approved: CE, ANSI, CSA, AS/NZS

UNIMIG UM-S-TG1L ROGUE TIG Welding Gloves

ROGUE TIG Welding Gloves are made from premium goat hide leather. The high-strength Kevlar stitching is durable against heat, and cotton-lined palms are used to increase control and decrease fatigue in your hands. The reinforced leather side patch assists in durability and reduces fatigue. The glove has also been designed to give you superior fingertip sensitivity for accurate welds.

Features

• Increased feel
• Decreased fatigue
• Premium goat hide leather
• High-strength Kevlar stitching

UNIMIG U42005 T2/T3W Consumable Starter Kit

We’ve revamped our TIG consumable starter kits! Now more versatile than ever, we’ve included a wider range of sizes for ceramic and quartz cups. Our starter kit now comes with everything you need to get welding across a wide range of applications.

Includes

• 3 x T2/T3W Ceramic Cups
• 1 x Ceramic Cup Size 7 (UMCT2C07)
• 1 x Ceramic Cup Size 8 (UMCT2C08)
• 1 x Ceramic Cup Size 10 (UMCT2C10)
• 3 x T2/T3W Quartz Cups
• 1 x Quartz Cup Size 6 (UMCT2QZ06)
• 1 x Quartz Cup SIze 8 (UMCT2QZ08)
• 1 x Quartz Cup Size 10 (UMCT2QZ10)
• 2 x T2/T3W Gas Lens Collet Bodies
• 1 x Gas Lens Collet Body 1.6mm (UMCT2GL16)
• 1 x Gas Lens Collet Body 2.4mm (UMCT2GL24)
• 4 x Rare Earth Tungsten Electrodes
• 2 x Rare Earth Tungsten Electrode 1.6mm (TR000516)
• 2 x Rare Earth Tungsten Electrode 2.4mm (TR000524)
• 1 x Quartz Zone Isolator (UMCT2QZSN)
• 1 x Heat Zone Isolator (UMCT2SN)
• 1 x Short Back Cap (UMCT2SBC)
• 1 x Head Gasket (UMCT2HG)