MAKITA 18V Brushless 6 Piece 2 x 5.0Ah Combo Kit DLX6120TX1
Pickup In Store
If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under $99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).
Total Tools - Low Price Guarantee Policy (Terms & Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our prices daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms & Conditions – see below for details]
At times prices have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply fill in price match form available on every product page or visit a Total Tools Store. We will verify the price, and then immediately match any current advertised price (Terms & Conditions apply).
Terms & Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Special event, club or membership offers, third party promotions or prices not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/price-match-guarantee. Alternatively, contact onlinesupport@totaltools.com.au.
REDEMPTION OFFER
Purchase a MAKITA 18V Brushless 6 Piece 2 x 5.0AH Combo Kit and receive a FREE 2 x MAKITA 18V 5.0Ah Lithium-Ion Battery OR MAKITA 18V 500mm Hedge Trimmer Skin via MAKITA Redemption. Offer valid from 1st April - 30th June 2024. Redeem by 15th July 2024.
Includes
- 1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
- 1 x MAKITA 18V Brushless 1/4" Impact Driver Skin DTD172Z
- 1 x MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z
- 1 x MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z
- 1 x MAKITA 18V Brushless Laminate Trimmer Skin DRT50Z
- 1 x MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3
- 2 x MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L
- 1 x MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892
- 1 x MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369
MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.
- Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
- 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter.
- LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application
- High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
- 2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
- All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
- XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability
Specifications
- Max. drilling capacities in wood:
- Auger bit: 50mm
- Self-feeding bit: 76mm
- Hole saw: 152mm
- Max. drilling capacities in steel: 13mm
- Max. drilling capacities in masonry: 16mm
- No load speed:
- Hi: 0 - 2,100rpm
- Lo: 0 - 550rpm
- Impact rate:
- Hi: 0 - 31,500ipm
- Lo: 0 - 8,250ipm
- Max. peak torque: 141Nm
- Max. tightening torque:
- Hard: 130Nm
- Soft: 65Nm
MAKITA 18V Brushless 1/4" Impact Driver Skin DTD172Z
- 4 stages of impact selection plus two T-modes, A-mode and bolt mode
- On the go single hand impact selection button
- Impressive 180Nm of max. fastening torque
- XPT technology enhances dust and moisture protection
- Ultra compact design with twin dual side LEDs
MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z
- Powerful Brushless DC motor (BLDC)
- Automatic Torque Drive; automatically increases motor torque according to load conditions
- Magnesium base with 45 and 50 degrees bevel cutting capacity
- Compact and lightweight design
- Rear dust exhaust port
- Twin LED job light with pre-glow
- LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
- Tool hanger for hanging on a ladder or rafter
- Large lock off lever easily operated even with a gloved hand
- Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries
Specifications
- Voltage: 18V
- No Load Speed: 5,000rpm
- Bevel Capacity: 50º
- Blade Diameter: 165mm
- Max Cutting Capacities:
- 0º: 57mm
- 45º: 41mm
- 50º: 37mm
- Weight: 3.3kg
- Length: 350mm
MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z
- 32mm stroke with a cutting capacity of 255mm in wood
- Newly designed vertical crank mechanism reduces vibration
- High performance 3,000spm no-load speed
- Rafter hanging hook for added convenience
- XPT technology that protects against dust & moisture
Specifications
- Length of Stroke: 32mm
- Max. cutting capacities in pipe: ø 130mm
- Max. cutting capacities in wood: 255mm
- Overall Length: 439mm
- Strokes per minute
- Hi: 0 - 3,000spm
- Lo: 0 - 2,300spm
- Voltage 18V
MAKITA 18V Brushless Laminate Trimmer Skin DRT50Z
- On/off switch with safety lock and variable speed - Prevents accidental start up of the tool during use or transport, protecting the user and the workpiece
- Shaft lock - easy installation and removal of trimmer bit with signle wrench by pressing the shaft lock
- Soft start - minimises start up shock and makes the tool start smoothly for optimum control
- BL Brushless Motor - Provides more power to the motor whilst inceasing runtime and durability
- Varibale speed control dial - The rotation speed of the tool can be changed from 10,000 - 30,000rpm by turning the speed dial
- Aluminium base with accurate rack and pinion depth adjustment
- LED job light for improved visibility
- Constant speed control - Provides constant rotation speed regadless of load conditions
- Collet capacity: 6.35mm (1/4"")
- Net Weight: 2.1kg (w/ 6.0Ah battery)
- No Load Speed: 10,000-30,000rpm
- Overall Length: 226mm
- Variety of optional accessories are included with this kit
MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3
The Makita 18V LXT Brushless Multi Tool (DTM52) delivers more power and less vibration than ever before. The DTM52 is engineered with premium features like AVT for reduced vibration and lower noise. While the new STARLOCK Max accessory mount system provides improved performance, ideal for cutting, sanding, scraping, grout removal, and more.
The DTM52 delivers increased cutting efficiency with an improved oscillation angle of 3.6 engineered for faster, more aggressive cutting and sanding. The variable speed control dial (6,000 20,000 OPM) and soft start feature enable the user to match the speed to the application with more control.
The DTM52 is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for builders, carpenters, plumbers, wood floor installers, and general trades seeking a best in class cordless multi tool.
- Starlock accessory mounting system designed for heavy duty applications
- Anti Vibration Technology (AVT) with a counterbalance system significantly reducing vibration
- Increased cutting efficiency with improved oscillation angle of 3.6 for rapid cutting speeds
- Variable speed control dial for adjusting the speed to suit the application
- Tool less lever lock system allows for quick install and removal of accessories
- Includes a Bow Shape Plunge Cut Saw Blade
Specifications
- Oscillation angle,left/right: 1.8 Degrees (3.6 Degrees Total)
- Oscillation per/min: 10,000 - 20,000opm
- Vibration: 2.5 m/s²
- Noise: 69dB(A)
- Voltage: 18V
- Tool-less Accessory Change: Yes
- Starlock Compatible: Yes
- Starlock Max Compatible: Yes
MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Up to 33% more run time per charge compared to BL1830
- Fast 40 minute charging time
- Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
- Battery resists self-discharge and remains ready for use even after long periods of storage
- Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
- Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
- The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
- If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892
- Fast charging - charges Li-Ion 3.0Ah battery in only22 minutes and Li-Ion Compact series batteries in only 15 mins
- Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
- Forced air cooling fan - cools the battery to minimise charging time
- Digital power display identifies the condition of the battery and charging condition
MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369
- Ideal for transport & storage of your favourite Makita tools
- Weather Resistant
- Durable Nylon Cordura Construction
- Internal Pockets feature straps to retain tools during transit
- External pockets enable storage of accessories and more
Part No | DLX6120TX1 |
---|---|
Brand | Makita |
Barcode | 0088381767729 |
Warranty | 3 Year |
Combo Kit | 6 Piece |
Corded / Cordless | Cordless |
Brushless/Brushed | Brushless |
Voltage | 18V |
Batteries Supplied | 2x5.0Ah |
Battery Capacity | 5.0Ah |
Battery Type | Lithium-Ion |
Battery / Manual | Battery |