CARBATEC 300mm Disc Sander w/ Brake & Half Guard DS-B300H
Pickup In Store
If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under $99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).
Total Tools - Low Price Guarantee Policy (Terms & Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our prices daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms & Conditions – see below for details]
At times prices have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply fill in price match form available on every product page or visit a Total Tools Store. We will verify the price, and then immediately match any current advertised price (Terms & Conditions apply).
Terms & Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Special event, club or membership offers, third party promotions or prices not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/price-match-guarantee. Alternatively, contact onlinesupport@totaltools.com.au.
At a basic level, Disc Sanders are made up of circular sandpaper mounted on a circular plate and are used to smooth timber as well as remove waste material. The workpiece is supported by a table positioned in front of the disc and sanding on the downward side of the disc sander ensures that the timber is driven onto the table by the rotation of the disc.
Disc sanders are perfect for end grain work, shaping corners as well as removing large amounts of waste material quickly (subject to grit selection).
We have taken the basic disc sander and added some unique features that woodworkers will love.
- The disc itself features a half-guard, so you can avoid those nasty ‘grabs’ as you slide a little too far to the right. This is removable if you want the extra room.
- We re-designed the table adjustment, so you can easily position the die-cast table, right up to the cast iron disc. This helps avoid tearing out the bottom face of your work, and
- helps prevent small pieces from disappearing down the gap.
- A dust port and disc brake are fitted standard and with the brake, top mounted for easy access.
- Pre-fitted Hook & Loop discs can be changed with ease.
- The table tilt has also been designed with ease of access for normal-sized hands.
- The tilt knobs are positioned outside the table edges (instead of you fiddling around underneath).
- 900W (1-1/4HP) Induction motor. Maximum power / Minimal noise
- 300mm Hook & Loop sanding disc
- Easy-adjust tilting table 0-45deg
- Half guard to help prevent unexpected grabs
- Mitre gauge for angles and compound angles
- Top mounted disc brake
- Adjustable rubber feet to dampen vibration
- Heavy cast iron body
Specifications
- Motor: 900W (1-1/4 HP) Induction - Regular 10A plug
- Mitre Gauge Included: Yes
- Speed: 1490 RPM
- Table Size: 438 x 156mm
- Tilt Type & Degree: Table Tilt 0-45deg
- Brake System: Manual - Top Mounted
Brand | Carbatec |
---|---|
Part No | DS-B300H |
Barcode | 9333827369922 |
Warranty | 1 Year |
Net Weight (kg) | 30.5 |
Product Length (mm) | 480 |
Product Width (mm) | 450 |
Product Height (mm) | 440 |