CARBATEC 1/2 HP 5 Speed Radial Arm Drill Press DP-R375H
Pickup In Store
If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under $99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).
Total Tools - Low Price Guarantee Policy (Terms & Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our prices daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms & Conditions – see below for details]
At times prices have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply fill in price match form available on every product page or visit a Total Tools Store. We will verify the price, and then immediately match any current advertised price (Terms & Conditions apply).
Terms & Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Special event, club or membership offers, third party promotions or prices not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/price-match-guarantee. Alternatively, contact onlinesupport@totaltools.com.au.
Radial arm drill presses are designed for complex compound angle drilling, with both the head and table able to tilt. The Carbatec 1/2 HP drill press is packed with features that makes it the drill press every workshop owner will want whether they be a hobbyist, professional or bespoke maker. With both the head and table able to tilt, all manner of angles can be drilled.
The Chuck to rear column capacity of this machine is variable from 130 to 420mm due to the sliding horizontal column. There are two columns, the usual standard vertical column that the table is mounted to, then there is a horizontal column as well that the head mounts to, allowing the chuck to be moved radially towards the column, or away from it giving an amazing 420mm column to drill capacity.
The 5 speeds are easily adjusted, by accessing the pulleys by opening the cover on top of the machine, and getting the appropriate drill speed for the job. The 1/2 HP motor powers the chuck through the ranges of 500 - 2450 RPM, capable of using drill bits from 3mm to 16mm.
The keyed chuck is fitted using a Morse Taper 2 shank to the drill press, so the user can swap this out to a keyless chuck if so desired, and has an 80mm travel so it can cope with many jobs asked of it.
The large 300mm diameter table features 6 slots capable of attaching a variety of clamps and jigs easily. Magnetic fences, jigs, and feather boards can be used on the cast iron table with great effectiveness.
- 1/2 HP induction motor
- Radial arm allows complex drilling operations such as inline holes
- Head and table tilt allowing for compound angles
- 5 speeds ranging from 500 to 2400 RPM
- Chuck capacity from 3mm to 16mm
- MT2 tapered chuck
Specifications
- Motor: 375W (1/2 HP) Induction - Regular 10A Plug
- Chuck To Base: 1225mm
- Chuck to Table Max: 700mm
- Column to Drill Centre: 130mm to 420mm
- Drill Chuck Capacity: 3mm to 16mm
- Drilling Capacity: 1/2" (12.75mm) steel
- Morse Taper: MT2
- Stroke: 80mm
- Table Size: 300mm diameter
- Table Tilt: 360°
- Workshop Footprint (WxDxH): 360mm x 830mm x 1640mm
- Tilt Type & Degree Table Tilt and Head Tilt: 45°L, 90°
- Base size: 240mm x 410mm
- Work Light Provision: No
- Speed Range (RPM): 500 - 2450 RPM
- Shipping Weight: 65Kg
- Net Weight: 60Kg
Brand | Carbatec |
---|---|
Part No | DP-R375H |
Barcode | 9333827016222 |
Warranty | 1 Year |
Net Weight (kg) | 65 |
Product Length (mm) | 360 |
Product Width (mm) | 830 |
Product Height (mm) | 1640 |