CARBATEC 380mm Thicknesser THX381C

SKU
..121096
MPN THX381C
In Stock
$4331
 

GET TO WORK NOW, PAY LATER Click to see your options

Paypal
Available for orders between $30 - $2,000
Zip
Available for orders up to $5,000
Afterpay
Love tools? Start earning points to redeem rewards on your next purchase Log in or Sign Up to redeem today!
Product Review Winner
Top 100 Relailer
30 Day Online Returns' with 'Australia's largest professional tool retailer

Helical cutterheads revolutionise your woodwork! Offering near silent cutting as well as less chatter and tear-out in curly or highly figured wood, these cutterheads save hours of cleanup work after dressing timber to the correct thickness.

The Carbatec TH-X381C thicknesser is literally stacked with features and will be a welcome addition in any workshop big or small. Features a powerful 3.5HP motor, a helical cutterhead, serrated infeed roller, polyurethane outfeed roller, anti-kickback fingers, adjustable bed rollers and a front-mounted Magnetic Starter NVR switch.

The cast iron tables on the infeed and outfeed instead of cheap rollers is just the beginning of this solid performer. Two feed rates and a rise and fall table round out the long list of features on this quality machine.

One distinct advantage you'll find with this machine is the low mounting of the motor - this provides space for the rollers that are fitted on the top of the machine, allowing you to feed and return material for repeated passes instead of carrying the material back to the infeed side by hand. Team up with a partner and they can feed the material back to you using the roller system further increasing your productivity.

This machine's 74, four-sided cutter knives (which can be rotated to offer a new cutting edge in seconds) are made of fine grain tungsten carbide and are held in place by a Torx style screw. Knives of this type last three to five times longer than good quality HSS knives. Multiply this by four cutting edges and you achieve 12 to 20 times the normal blade life of a HSS blade set. Easily turned and seated, they present a fully sharpened and indexed cutting edge. No complex blade setting or jigs are required - you simply replace the blade when all four edges have been used.

This style of cutterhead also reduces the size of shavings when cutting; increasing the effectiveness of your dust collection setup. It gives smoother cuts, less tearout and has less vibration during use. The use of at least a 2HP dust collector is recommended for this machine to enable efficient and clean productivity.

  • 380mm wide x 205mm high timber capacity
  • Helical cutterhead contains 74 cutters
  • 2 speed gearbox
  • 4" (100mm) dust chute
  • Solid cast iron construction
  • 3.5HP (240V) single phase heavy duty motor
  • Motor housed within base cabinet
  • Built in mobile base for ease of movement and placement
Specification
Part No THX381C
Barcode 9333827201512
Brand Carbatec

Reviews

Write Your Own Review