FLUKE 100-1000V Multifunction Installation Tester w. Memory FLU1662
Pickup In Store
If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under $99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).
Total Tools - Low Price Guarantee Policy (Terms & Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our prices daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms & Conditions – see below for details]
At times prices have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply fill in price match form available on every product page or visit a Total Tools Store. We will verify the price, and then immediately match any current advertised price (Terms & Conditions apply).
Terms & Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Special event, club or membership offers, third party promotions or prices not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/price-match-guarantee. Alternatively, contact onlinesupport@totaltools.com.au.
Fluke 1662 Multifunction Installation Tester delivers solid, basic installation testing features.
The Fluke 1662 installation tester gives you Fluke reliability and all the basic testing power you need for day-in, day-out installation testing. It tests to all local regulations and is easy and intuitive to use. Additional helpful features like the On/Off switchable auto-start for RCD and loop test, and self-test save time and give you more confidence in your results.
- Measures RCD switching time and tripping level (ramp test)
- Measures trip time and current for RCD type A & AC in one test
- Measures RCD variable current
- Provides automatic RCD test sequence
- Includes Z-max memory for loop tests to support easy evaluation of the highest loop test value
- Provides unique zero adapter for fast, reliable and accurate test lead and mains cord compensation
- Includes a phase sequence indicator
- Comes with hard carrying case, padded carrying and waist strap, and remote control probe and lead
A solid, reliable, basic installation tester
- Tests voltage and frequency
- Checks wiring polarity to detect broken N wires
- Measures insulation resistance and loop and line resistance
- Measures motor windings with continuity test
- Calculates prospective earth fault current (PEFC/IK) and prospective short-circuit current (PSC/IK)
Specifications:
AC voltage measurement:
- Range: 500 V
- Resolution: 0.1 V
- Accuracy 45 Hz – 66 Hz: 0.8% + 3
- Input impedance: 360 kΩ
- Overload protection: 660 V rms
Continuity testing (RLO):
- Range (autoranging): 20 Ω / 200 Ω / 2000 Ω
- Resolution: 0.01 Ω / 0.1 Ω / 1 Ω
- Open Circuit Voltage: >4 V
Insulation resistance measurement (RISO):
- Accuracy of tTest voltage (at rated test current): +10%, -0%
- Test voltage:
- 100 V
- 250 V
- 500 V
- 1000 V
- Insulation resistance range:
- 20 MΩ / 50 MΩ
- 20 MΩ / 100 MΩ
- 20 MΩ / 200 MΩ
- 20 MΩ / 200 MΩ / 500 MΩ
- 20 MΩ / 200 MΩ / 1000 MΩ
- Resolution:
- 0.01 MΩ / 0.1 MΩ
- 0.01 MΩ / 0.1 MΩ
- 0.01 MΩ / 0.1 MΩ
- 0.01 MΩ / 0.1 MΩ / 1 MΩ
- 0.01 MΩ / 0.1 MΩ / 1 MΩ
- Test current:
- 1 mA @ 50 kΩ
- 1 mA @ 100 kΩ
- 1 mA @ 250 kΩ
- 1 mA @ 500 kΩ
- 1 mA @ 1 MΩ
Loop and line impedance (ZI):
- Range: 10 Ω / 0.001 Ω / High current mΩ mode
- Resolution: 0.01 Ω / 0.1 Ω / 1 Ω
Prospective earth fault current, PSC test:
- Range: 1000 A / 10 kA (50 kA)
- Resolution: 1 A / 0.1 kA
- Computation: Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively.
RCD testing, RCD types tested:
- RCD Type: A4, AC¹, G², S³
- Notes:
- 1 Responds to AC
- 2 General, no delay
- 3 Time delay
- 4 Responds to pulsed signal
- 5 Responds to smooth DC signal
Tripping speed test (ΔT):
- Current settings¹:
- 10-30-100-300-500-1000 mA – VAR
- 10-30-100 mA
- Multiplier:
- x ½, x 1
- x 5
- Measurement range:
- RCD Type G: 310 ms, 50 ms
- RCD Type S: 510 ms, 160 ms
- Notes:
- ¹1000 mA type AC only
- 700 mA maximum type A in VAR mode
- VAR mode not available for type B.
RCD/FI-Tripping Current Measurement/Ramp Test (IΔN):
- Current range: 30% to 110% of RCD rated current¹
- Step size: 10% of IΔN²
- Dwell time:
- Type G - 300 ms/step
- Type S - 500 ms/step
- Measurement accuracy: ±5%
- Specified trip current ranges (EN 61008-1):
- 50% to 100% for Type AC
- 35% to 140% for Type A (>10 mA)
- 35% to 200% for Type A (≤10 mA)
- 50% to 200% for Type B
- 25% for Type B
- Notes:
- ¹30% to 150% for Type A IΔN > 10 mA
- 30% to 210% for Type A IΔN = 10 mA
- 20% to 210% for Type B
Phase Sequence Indication:
- Icon: icon phase sequence indicator Phase Sequence indicator is active.
General Specifications:
- Size (L x W x H): 10 x 25 x 12.5 cm
- Weight (incl. batteries): 1.3 Kg
- Battery size, quantity: Type AA, 6 ea.
- Sealing: IP-40
- Safety: Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA –s82.02.01 2000 and CAN/CSA c22.2 No. 1010 2nd edition
- Overvoltage: CAT III / 500V; CAT IV 300V
- Performance: EN61557-1 to EN61557-7 Second Edition and EN61557-10 Second Edition
Includes:
- 6x AA (IEC LR6) cell batteries
- C1600 hard carrying case
- Zero adapter
- Heavy duty mains cord
- STD standard test lead set
- C1600 hard carrying case
- Padded carrying and waist strap
- Quick reference guide
- TP165X remote control probe and lead
- User's manual on CD-ROM
Part No | FLU1662 |
---|---|
Barcode | 95969766821 |
Brand | Fluke |
Product Length (mm) | 100 |
Product Width (mm) | 250 |
Product Height (mm) | 125 |
Voltage | 1000V |