UNIMIG Viper 185 Multi Process Pulse Mig/Tig/Stick 10A Welder U11260
GET TO WORK NOW, PAY LATER Click to see your options
Pickup In Store
If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under $99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).
Total Tools - Low Price Guarantee Policy (Terms & Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our prices daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms & Conditions – see below for details]
At times prices have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply fill in price match form available on every product page or visit a Total Tools Store. We will verify the price, and then immediately match any current advertised price (Terms & Conditions apply).
Terms & Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Special event, club or membership offers, third party promotions or prices not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/price-match-guarantee. Alternatively, contact onlinesupport@totaltools.com.au.
Now with single pulse MIG, the VIPER MULTI 185 is the perfect multi-process machine for all those home repairs and hobby projects you've got planned.
- Single pulse MIG programs
- Quick and easy setup with Smart-Set MIG programs
- 4.3"" LCD touchscreen
- Features a digital geared wire drive
- Change settings with ease with the intuitive controls and next-generation user interface.
- Smart Fan
- Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine.
- Power Factor Correction (PFC)
- Get the most out of your machine. The PFC maximises the electrical efficiency of the machine and automatically compensates for any voltage fluctuations, so you get more output power and the internal components last longer.
- Job Memory
- The job memory function allows you to enter and store weld parameter settings. Weld parameters can be further adjusted and stored as required. A total of 10 Jobs can be memorised and stored for recall.
- Generator Compatible
- Going off the grid? The VIPER MULTI 185 can be connected to a generator, we recommend one with at least 10kVA.
- IP21S Rating
- Rated IP21S, so it’s protected from touch by fingers and objects greater than 12mm, and water spray from a vertical direction.
- Foot Control Ready
- Enjoy greater control and precision with our optional foot control accessory. This handy feature allows you to easily adjust your TIG amperage on the fly, without interrupting your torch movement.
Specifications
- SKU: U11260
- Primary Input Voltage: 240V Single Phase 50/60Hz
- Supply Plug: 10A
- Ieff (A): 10.0
- Imax (A): 31.0
- Rated Output: 20-185A
- No Load Voltage (V): 67.0
- Protection Class: IP21S
- Insulation Class: H
- Minimum Generator (kVA): 10
- Dinse Connector: 35/50
- Standard: AS 60974.1
- Welds: MIG: Mild Steel, Stainless Steel, Aluminium, Silicon Bronze | MMA: Mild Steel, Stainless Steel, Cast Iron | TIG: Mild Steel, Stainless
- Steel, Copper, Silicon Bronze, Titanium
- Warranty (Years): 3
- MIG Specifications
- MIG Welding Current Range: 30-185A
- MIG Duty Cycle @ 40°C: 10% @ 185A, 60% @ 77A, 100% @ 60A
- MIG Wire Size Range: 0.6-1.0mm
- MIG Wire Spool Size: 1kg (100mm) / 5kg (200mm)
- MIG Welding Thickness Range: 1-10mm
- Drive Roller Size: 30/22
- Pulse MIG
- Less spatter. Lower heat. Smoother results. Streamline your welds with the single pulse functions.
- A single pulse weld alternates between a peak and base current, which works to minimise the amount of heat input without compromising on any of the penetration. The addition of a base current and reduction in heat means it's perfect for softer materials like aluminium. Pulse welding is also done by spray transfer, eliminating spatter and cutting your post-weld clean-up time.
- MIG Smart-Set
- Setting up for a weld has never been easier, just set your wire material and size, gas, and joint type and you’re ready to weld!
- Complete MIG Weld Cycle Control
- Get complete control over your MIG welds with a full set of adjustable parameters, such as pre- and post-gas flow, inductance, and burnback.
- Spool Gun Ready
- Make welding aluminium even easier. No need to change your existing setup. The spool gun lets you quickly switch over and get any job done with no downtime.
- Adjustable Arc Length
- Get absolute precision on your settings. The adjustable arc length allows you to increase or decrease the preselected voltage while in synergic and pulse MIG modes.
- Burnback Adjustment
- Stop your wire from ever fusing with your weld or your contact tips again. Tune your burnback control to suit how much wire you want to remain sticking out from your torch when you finish a weld.
- Gas-Shielded & Gasless Wires
- This machine supports both gas-shielded MIG and gasless MIG, meaning you can run mild steel, stainless steel, aluminium as well as flux-cored MIG wires.
- Inductance Control
- Change the frequency of your short circuit MIG welds with the Inductance settings, so you can choose your preferred arc characteristics.
- Geared Wire Drive
- This machine features a geared roller drive unit, providing consistent and smooth wire feed, and it helps when using longer MIG torches.
- TIG Specifications
- TIG Function Type: DC High-Frequency TIG
- TIG Welding Current Range: 20-185A
- TIG Duty Cycle @ 40°C: 10% @ 185A, 60% @ 77A, 100% @ 60A
- TIG Welding Thickness Range: 1-6mm
- TIG Smart-Set
- The easiest way to set up for a TIG weld, simply set your filler material, joint type, tungsten diameter, material thickness, and gas and you’re good to go!
- High-Frequency TIG
- Maximise your results from start to finish. A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre- and post-gas and up and down slope parameters
- MMA Specifications
- STICK Welding Current Range: 20-180A
- STICK Duty Cycle @ 40°C: 10% @ 180A, 60% @ 75A, 100% @ 60A
- STICK Electrode Range: 2.5-4.0mm
- STICK Welding Thickness Range: 2-10mm
- Hot Start
- The Hot Start feature gives a boost of current at the beginning of your weld, stabilising your ignition and eliminating any issues with striking an arc, especially on difficult electrodes.
- Arc Force
- The Arc Force feature helps to keep the arc stabilised throughout the weld, by increasing or decreasing the peak current to compensate for your arc length, preventing the arc from cutting out or the electrode from sticking.
- Anti Stick
- The Anti Stick feature, which is always on, prevents your electrode from sticking to your workpiece. When the machine detects sticking, the current will drop significantly, so the electrode can be removed.
Includes
- VIPER MULTI 185 Welder
- 3m M26 MIG Torch
- 3m Twist Lock Electrode Holder
- 3m 300 Amp Earth Clamp & Lead
- Argon Regulator
- 1.8m Quick-Connect Gas Hose
- 9-to-9 Pin TIG Torch Adapter
- Operating Manual
- 0.8-0.9mm V Groove Roller
- 0.8-0.9mm F Groove Roller
- 1.0-1.2mm U Groove Roller
| Part No | U11260 |
|---|---|
| Barcode | 9333521061146 |
| Brand | UNIMIG |
| Warranty | 3 Year |
