PUMA Piston Air Compressor Silent 7.5HP 1200L/Min Dryer & 300L Tank Professional Kit


In Stock

  • Warranty: 1 Year
Customize PUMA Piston Air Compressor Silent 7.5HP 1200L/Min Dryer & 300L Tank Professional Kit
PUMA 7.5HP 930L/Min Silent Recip Piston Compressor PUP40S415V   + $0
FUSHENG 1200L/min Air Compressed Dryer Suits 10HP Compressors FSFR010A   + $0

* Required Fields

Your Customization


    More than 1 million happy customers
    Top 100 PowerRetail
    30 Day Online Returns' with 'Australia’s largest professional tool retailer


    Puma 7.5HP 930L/min Silent Electric Motor Compressor PUP40S415V

    Puma 415 Volt Silent air compressors have been developed for workplace use to mitigate the occupational health risk caused by excessive noise. Using innovative design, Puma has combined the cost benefits of a piston compressor with the quiet operating characteristics of a screw compressor. These compact and stylish units offer an economical low-noise solution for applications with intermittent or fluctuating compressed air demand. Factory, workshop and industrial users will really appreciate the improved working conditions delivered by a Puma Silent air compressor at your jobsite.

    • Soundproofed Enclosure - State-of-the-art soundproofed enclosure enables the compressor set to be installed directly within the working environment without the need for a separate plant room.
    • Puma Compressor Pump - Puma’s traditional over-square pump design delivers high flow rates at low pump speeds. Its full cast iron construction is built tough for reliability and long service life.
    • Teco 415V Electric Motor - The fully copper-wound, high-efficiency MEPS-compliant motor saves you money and reduces your enterprise’s carbon footprint by using less electricity.
    • Operator Control Panel - Fully automatic on-off operation is selectable via push buttons on the control panel. A pressure gauge and indicator lights provide at-a-glance monitoring of the unit’s status.
    • Built-In Protection - Low oil shutdown, motor overload release, and air pressure relief systems provide constant protection against major component damage.
    • Electric Cooling Fans - Dual secondary cooling fans with run-on timer eliminate compressor overheating problems that can otherwise occur when operating under extreme duty cycles.
    • Accessories - A full range of matching vertical air receivers, refrigerant dryers, filters, and other compressed air system components is available for the Puma 415 Volt Silent compressors.


    • Motor Power: 5.5kW (7.5hp)
    • Pump Displacement: 1,020L/min (36.0cfm)
    • Free Air Delivery: 760L/min (26.9cfm)
    • Maximum Pressure: 930kPa (135psi)
    • Pump Speed: 810rpm
    • Pump Model: PG75
    • Current Draw: 12.7 Amps
    • Internal Tank: 6L
    • Noise Level: 65dB(A)
    • Outlet Size: 1"
    • Optional Extra: 150 or 330L Vert. Tank

    Fusheng 1200L/min Air Compressed Dryer Suits 10HP Compressors FSFR010A

    The Fusheng FR Series is a premium quality range of high-efficiency refrigerant dryers offering effective moisture removal with maximum reliability. All models feature a stainless steel heat exchanger and auto capacity control system. Performance rated for the Australian climate. The Fusheng FR series refrigeration dryer provides both air-cooled models and water-cooled models. Each type can be further divided to high temperature and low-temperature models based on the inlet air temperature demand from the customer end.

    • Uses ozone-friendly refrigerant R134a or R407C
    • Uses a unique air heat exchanger with a brass pipe and fin design to prevent piping condensation.
    • Uses anti-corrosive nickel-plated brass pipes for longer service life.
    • Equipped with a computerized control panel and flow chart display for the easiest operation.
    • Uses a flange connection for evaporators in the power range from 300 hp and above to allow for easy maintenance.


    • Airflow Capacity: 1.2 m³/min (42.4 cfm)
    • Rated Air Pressure: 700 kPa (102 psi)
    • Maximum Pressure: 1,000 kPa (145 psi)
    • Inlet Air Temp.: 35°C Nom. / 50°C Max.
    • Ambient Temp.: 32°C Nom. / 40°C Max.
    • Dew Point: 3°C Nom. / 10°C Max.
    • Inlet & Outlet Size: 3/4 inch BSP
    • Electricity Supply: 240 Volts, 10 Amps

    300L Tank

    • Volume: 300L
    • Design Pressure: 1215 KPA
    • Designed & Manufactured in accordance with Australian Standards: AS 1210-2010
    • Two-pack Polyurethane paint
    • 4x 1-1/2" sockets
    • Length: 210cm
    • Width: 61cm
    • Height: 73cm
    • Weight: 159kg

    Kit Includes:

    PUMA 7.5HP 930L/Min Silent Recip Piston Compressor PUP40S415V


    FUSHENG 1200L/min Air Compressed Dryer Suits 10HP Compressors FSFR010A



    Part No PUP40S415VPKG
    Barcode 9347923001334
    Brand Puma
    Warranty 1 Year
    Net Weight (kg) 582
    Product Length (mm) 1440
    Product Width (mm) 890
    Product Height (mm) 2110

    Pickup In Store

    If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.

    Free Delivery

    Most products are included in free delivery, however some are excluded as follows:

    • Orders and/or items under $99.
    • Orders and/or items that are deemed bulky, large or heavy.
    • Clearance items.
    • Orders that include or items that are classed as dangerous goods.
    • Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
    • Interstate deliveries.

    Total Tools reserve the right to change or withdraw free delivery at any time.

    Estimated Delivery Timeframes

    If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.

    If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.

    We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:

    • Metro (Excludes Hobart Metro) 1-2 business days
    • Hobart Metro 3-4 business days
    • Regional Areas 3-4 business days
    • Remote Areas 6-9 business days

    Please note that these delivery timeframes are estimates and are not guaranteed.


    Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).


    Write Your Own Review