FLUKE Industrial Electrician Combo Kit FLU87V/E2
Pickup In Store
If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under $99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).
Total Tools - Low Price Guarantee Policy (Terms & Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our prices daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms & Conditions – see below for details]
At times prices have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply fill in price match form available on every product page or visit a Total Tools Store. We will verify the price, and then immediately match any current advertised price (Terms & Conditions apply).
Terms & Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Special event, club or membership offers, third party promotions or prices not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/price-match-guarantee. Alternatively, contact onlinesupport@totaltools.com.au.
This combo kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world, and includes special accessories to make you even more productive on the job. This kit will save over 15% compared with the individual price of all the accessories. Plus you'll be working with the most trusted tools in the world.
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
- True-rms ac voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05% DC accuracy
- 6000 counts, 3-3/4 digits
- 4-1/2 digit mode for precise measurements (20,000 counts)
- Measure up to 1000 V AC and DC
- Measure up to 10 A, 20 A for up to 30 seconds
- Built in thermometer lets you carry one less tool (TC probe included)
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity and diode test
- 10,000 µF capacitance range for components and motor caps
- Min/Max-Average recording with Min/Max Alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- "Classic" design with new removable holster with built in test lead and probe storage
- Lifetime warranty
Electrical safety
All inputs are protected to the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.
Correctly measure pulse-width modulated motor drive signals
Until now, there hasn't been a multimeter able to accurately measure adjustable speed drives. But the Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.
- Unique function for accurate measurements of noisy pulse-width modulated AC voltage. Measures correctly at the ASD and at the motor terminals
- Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency
- Measure AC current with an optional current clamp accessory
- Compare reading from the 87V with the display on the ASD
- Special shielding blocks high frequency, high-energy noise generated by large drive systems
Specifications:
- Voltage DC:
- Maximum Voltage: 1000 V
- Accuracy: ±(0.05% + 1)
- Maximum Resolution: 10 µV
- Voltage AC:
- Maximum Voltage: 1000 V
- Accuracy: ±(0.7% + 2) True RMS
- AC Bandwidth: 20 kHz with low pass filter; 3 db @ 1 kHz
- Maximum Resolution: 0.1 mV
- Current DC:
- Maximum Amps: 10 A (20 A for 30 seconds maximum)
- Amps Accuracy: ±(0.2% + 2)
- Maximum Resolution: 0.01 µA
- Current AC:
- Maximum Amps: 10 A (20 A for 30 seconds maximum)
- Amps Accuracy: ±(1.0% + 2) True RMS
- Maximum Resolution: 0.1 µA
- Resistance:
- Maximum Resistance: 50 MΩ
- Accuracy: ±(0.2% + 1)
- Maximum Resolution: 0.1Ω
- Capacitance:
- Maximum Capacitance: 9,999 µF
- Accuracy: ±(1% + 2)
- Maximum Resolution: 0.01 nF
- Frequency:
- Maximum Frequency: 200 kHz
- Accuracy: ±(0.005% + 1)
- Maximum Resolution: 0.01 Hz
- Duty Cycle:
- Maximum Duty Cycle: 99.9%
- Accuracy: ±(0.2% per khz +0.1%)
- Maximum Resolution: 0.1%
- Temperature Measurement:
- -200.0°C - 1090°C
- -328.0°F - 1994.0°F
- excluding probe
- 80 BK Temperature Probe:
- -40.0°C - 260°C
- -40.0°F - 500°F, 2.2°C or 2% whichever is greater
- Conductance:
- Maximum Conductance: 60.00 nS
- Accuracy: ±(1.0% + 10)
- Maximum Resolution: 0.01 nS
- Diode:
- Range: 3 V
- Resolution: 1 mV
- Accuracy: ±(2% + 1)
- Duty Cycle Range: Accuracy - Within ±(02% per kHz +0.1%)
Environmental Specifications:
- Operating Temperature: -20°C to +55°C
- Storage Temperature: -40°C to +60°C
- Humidity (Without Condensation):
- 0% - 90% (0°C - 35°C)
- 0% - 70% (35°C - 55°C)
- Operating Altitude: 2000 m
Safety Specifications:
- Overvoltage category: EN 61010-1 to 1000 V CAT III, 600V CAT IV
- Agency Approvals: UL, CSA, TÜV, VDE listed
Mechanical and General Specifications:
- Weight:
- 355 g
- 624 g - with holster
- Display:
- Digital:
- 6000 counts updates 4/sec.
- 19,999 counts in high-resolution mode
- Analog: 32 segments, updates 40/sec.
- Frequency: 19,999 counts, updates 3/sec at > 10 Hz
- Digital:
- Battery Life: Alkaline ~400 hours typical, without backlight
- Shock: 1 Meter drop per IEC 61010-1:2001
- Vibration: Per MIL-PRF-28800 for a Class 2 instrument
Part No | FLU87V/E2 |
---|---|
Barcode | 95969353212 |
Brand | Fluke |
Warranty | Lifetime |
Net Weight (kg) | 0.36 |
Product Length (mm) | 201 |
Product Width (mm) | 98 |
Product Height (mm) | 52 |