FLUKE 1587 FC Troubleshoot Kit FLU1587MDTFC
GET TO WORK NOW, PAY LATER Click to see your options
Pickup In Store
If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under $99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).
Total Tools - Low Price Guarantee Policy (Terms & Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our prices daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms & Conditions – see below for details]
At times prices have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply fill in price match form available on every product page or visit a Total Tools Store. We will verify the price, and then immediately match any current advertised price (Terms & Conditions apply).
Terms & Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Special event, club or membership offers, third party promotions or prices not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/price-match-guarantee. Alternatively, contact onlinesupport@totaltools.com.au.
The Fluke 1587 FC Insulation Multimeter features four powerful new diagnostic functions through the Fluke Connect Measurements app:
- Pl/DAR timed ratio tests with TrendIt™ graphs identifies moisture and contaminated insulation problems faster
- Memory storage through Fluke Connect eliminates writing down results, reduces errors and saves data for historical tracking over time
- Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons
- Historical tracking and trending of assets identifies degradation over time, allows real-time decisions to be made in the field with Fluke Connect® Assets
The Fluke i400 AC Current Clamp is a high-safety current clamp for digital multimeters. The current clamp provides accurate current measurements without breaking electric circuits, helping you take measurements safely with industry standard safety ratings.
Fluke 9040 Phase Rotation Indicator is effective for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems. It allows rapid determination of phase sequence and ideally suited for commercial and industrial applications.
Electrical Specifications
- AC voltage measurement
- Range: 600.0 mV
- Resolution: 0.1 mV
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3)
- Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3)
- Range: 6.000 V
- Resolution: 0.001 V
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3)
- Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3)
- Range: 60.00 V
- Resolution: 0.01 V
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3)
- Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3)
- Range: 600.0 V
- Resolution: 0.1 V
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3)
- Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3)¹
- Range: 1000 V
- Resolution: 1 V
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(2% + 3)
- Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts): ±(2% + 3)¹
- Range: 600.0 mV
¹ 1 kHz bandwidth
Low-Pass Filter Voltage
- Range: 600.0 mV
- Resolution: 0.1 mV
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3)
- Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)
- Range: 6.000 V
- Resolution: 0.001 V
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3)
- Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)
- Range: 60.00 V
- Resolution 0.01 V
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3)
- Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)
- Range: 600.0 V
- Resolution: 0.1 V
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(1% + 3)
- Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)
- Range: 1000 V
- Resolution: 1 V
- Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts): ±(2% + 3)
- Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts): +(2% + 3), -(6% - 3)
DC Voltage Measurement
- Range: 6.000 V dc
- Resolution: 0.001 V
- Accuracy ±(% of Rdg + Counts): ±(0.09% + 2)
- Range: 60.00 V dc
- Resolution: 0.01 V
- Accuracy ±(% of Rdg + Counts): ±(0.09% + 2)
- Range: 600.0 V dc
- Resolution: 0.1 V
- Accuracy ±(% of Rdg + Counts): ±(0.09% + 2)
- Input impedance: 10 MΩ (nominal), <100 pF
- Normal mode rejection ratio: >60 dB @ 50 Hz or 60 Hz
- Common mode rejection ratio: >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance)
- Accuracies apply to ± 100% of range
DC Millivolts Measurement
- Range: 600.0 mVdc
- Resolution: 0.1 mV
- Accuracy ±(% of Rdg + Counts): ±(0.1% + 1)
DC and AC Current Measurement
- AC 45 Hz to 1000 Hz
- Range: 400 mA
- Resolution: 0.1 mA
- Accuracy ±(% of Rdg+Counts): ±(1.5% + 2)¹
- Burden voltage (Typical): 2 mV/mA
- Range: 60 mA
- Resolution: 0.01 mA
- Accuracy ±(% of Rdg+Counts): ±(1.5% + 2)¹
- Burden voltage (Typical): 2 mV/mA
DC
- Range: 400 mA
- Resolution: 0.1 mA
- Accuracy ±(% of Rdg+Counts): ±(0.2% + 2)
- Burden voltage (Typical): 2 mV/mA
- Range: 60 mA
- Resolution: 0.01 mA
- Accuracy ±(% of Rdg+Counts): ±(0.2% + 2)
- Burden voltage (Typical): 2 mV/mA
- Overload: 600 mA for 2 minutes maximum
- Fuse protection for mA input: 0.44 mA, 1000 V, IR 10 kA
- AC conversion: Inputs are ac-coupled and calibrated to the rms value of sine wave input
Conversions are true-rms responding and specified from 5% to 100% of range. Input signal crest factor can be up to 3 up to 300 mA, decreasing linearly to crest factor ≤1.5 at 600 mA. For non-sinusoidal waveforms add +(2% reading + 2% FS) typical, for a crest factor up to 3.
¹ 1 kHz bandwidth
Ohms Measurement
- Range: 600.0 Ω
- Resolution: 0.1 Ω
- Accuracy +(% of Rdg+Counts)¹: ±(0.9% + 2)
- Range: 6.000 kΩ
- Resolution: 0.001 kΩ
- Accuracy +(% of Rdg+Counts)¹: ±(0.9% + 2)
- Range: 60.00 kΩ
- Resolution: 0.01 kΩ
- Accuracy +(% of Rdg+Counts)¹: ±(0.9% + 2)
- Range: 600.0 kΩ
- Resolution: 0.1 KΩ
- Accuracy +(% of Rdg+Counts)¹: ±(0.9% + 2)
- Range: 6.000 MΩ
- Resolution: 0.001 MΩ
- Accuracy +(% of Rdg+Counts)¹: ±(0.9% + 2)
- Range: 50.0 MΩ ²
- Resolution: 0.01 MΩ
- Accuracy +(% of Rdg+Counts)¹: ±(1.5% + 3)
- Overload protection: 1000 V rms or dc
- Open circuit test voltage: <8.0 V dc
- Short circuit current: <1.1 mA
¹ Accuracies apply from 0% to 100% of range
² Up to 80% relative humidity
Diode Test
- Diode test indication: Display voltage drop: 0.6 V at1.0 mA nominal test current:
- Accuracy: ±(2% + 3)
Continuity Test
- Continuity indication: Continuous audible tone for testresistance below 25 Ω and off above 100 Ω. Maximum Reading; 1000 Ω
- Open circuit voltage: <8.0 V
- Short circuit current: 1.0 mA typical
- Overload protection: 1000 V rms
- Response time: >1 m sec
Frequency Measurement
- Range: 99.99 Hz
- Resolution: 0.01 Hz
- Accuracy +(% of Rdg+Counts)¹: ±(0.1% + 1)
- Range: 999.9 Hz
- Resolution: 0.1 Hz
- Accuracy +(% of Rdg+Counts)¹: ±(0.1% + 1)
- Range: 9.999 kHz
- Resolution: 0.001 kHz
- Accuracy +(% of Rdg+Counts)¹: ±(0.1% + 1)
- Range: 99.99 kHz
- Resolution: 0.01 kHz
- Accuracy +(% of Rdg+Counts)¹: ±(0.1% + 1)
Frequency Counter Sensitivity
- 600.0 mV ac:
- V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 100.0 mV
- V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: 150.0 mV
- DC Trigger Levels¹ to 20 kHz²: NA
- 6.0 V:
- V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 1.0 V
- V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: 1.5 V
- DC Trigger Levels¹ to 20 kHz²: -400.0 mV and 2.5 V
- 60.0 V:
- V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 10.0 V
- V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: 36.0 V
- DC Trigger Levels¹ to 20 kHz²: 1.2 V and 4.0 V
- 600.0 V:
- V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 100.0 V
- V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: -
- DC Trigger Levels¹ to 20 kHz²: 12.0 V and 40.0 V
- 1000.0 V:
- V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz: 300.0 V
- V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz: -
- DC Trigger Levels¹ to 20 kHz²: 12.0 V and 40.0 V
¹ Maximum input for specified accuracy = 10x range (1000 V max). Noise at low frequencies and amplitudes may affect accuracy
² Usable to 100 kHz with full scale input
Capacitance
- Range: 1000 nF
- Resolution: 1 nF
- Accuracy ±(% of Rdg+Counts): ±(1.2% + 2)
- Range: 10.00 μF
- Resolution: 0.01 μF
- Accuracy ±(% of Rdg+Counts): ±(1.2% + 2)
- Range: 100.0 μF
- Resolution: 0.1 μF
- Accuracy ±(% of Rdg+Counts): ±(1.2% ±90 counts)
- Range: 9999 μF
- Resolution: 1 μF
- Accuracy ±(% of Rdg+Counts): (1.2% ±90 counts)
Temperature Measurement
- Range: -40 ° C to 537 ° C
- Resolution: 0.1 °C
- Accuracy ±(% of Rdg+Counts): ±(1% + 10 counts)
- Range: -40 ° F to 998 ° F
- Resolution: 0.1 °F
- Accuracy ±(% of Rdg+Counts): ±(1% + 18 counts)
¹ Accuracies apply following 90 minutes settling time after a change in the ambient temperature of the instrument
Insulation Specifications
- Measurement range: 0.01 MΩ to 2 GΩ
- Test voltages: 50, 100, 250, 500, 1000 V
- Test voltage accuracy: +20%, -0%
- Short-circuit test current: 1 mA nominal
- Auto discharge: Discharge time <0.5 second for C = 1 μF or less
- Live circuit detection: Inhibit test if terminal voltage > 30 V prior to initialization of test
- Maximum capacitive load: Operable with up to 1 μF load
Output Voltage
- 50 V (0% to +20%):
- Display range: 0.01 to 6.00 MΩ
- Resolution: 0.01 MΩ
- Test current: 1 mA @ 50 kΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(3% + 5 counts)
- Display range: 6.0 to 50.0 MΩ
- Resolution: 0.1 MΩ
- Test current: 1 mA @ 50 kΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(3% + 5 counts)
- 100 V (0% to +20%):
- Display range: 0.01 to 6.00 MΩ
- Resolution: 0.01 MΩ
- Test current: 1 mA @ 100 kΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(3% + 5 counts)
- Display range: 6.0 to 60.0 MΩ
- Resolution: 0.1 MΩ
- Test current: 1 mA @ 100 kΩ
- Resistance accuracy ±(% of Rdg + Counts: ±(3% + 5 counts)
- Display range: 60 to 100 MΩ
- Resolution: 1 MΩ
- Test current: 1 mA @ 100 kΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(3% + 5 counts)
- 250 V (0% to +20%):
- Display range: 0.1 to 60.0 MΩ
- Resolution: 0.1 MΩ
- Test current: 1 mA @ 250 kΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
- Display range: 60 to 250 MΩ
- Resolution: 1 MΩ
- Test current: 1 mA @ 250 kΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
- 500 V (0% to +20%)
- Display range: 0.1 to 60.0 MΩ
- Resolution: 0.1 MΩ
- Test current: 1 mA @ 500 kΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
- Display range: 60 to 500 MΩ
- Resolution: 1 MΩ
- Test current: 1 mA @ 500 kΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
- 1000 V (0% to +20%):
- Display range: 0.1 to 60.0 MΩ
- Resolution: 0.1 MΩ
- Test current: 1 mA @ 1 MΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
- Display range: 60 to 600 MΩ
- Resolution: 1 MΩ
- Test current: 1 mA @ 1 MΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(1.5% + 5 counts)
- Display range: 0.6 to 2.0 GΩ
- Resolution: 100 MΩ
- Test current: 1 mA @ 1 MΩ
- Resistance accuracy ±(% of Rdg + Counts): ±(10% + 3 counts)
General Specifications
- Maximum voltage applied to any terminal and common: 1000 V
- Storage temperature: -40 °C to 60 °C (-40 °F to 140 °F)
- Operating temperature: -20 °C to 55 °C (-4 °F to 131 °F)
- Temperature coefficient: 0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)
- Relative humidity:
- Noncondensing
- 0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F)
- 0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F)
- 0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F)
- Vibration: Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
- Radio frequency communication: 2.4 GHz ISM Band
- Radio frequency certification: FCC: T68-FBLE, IC: 6627A-FBLE
Electromagnetic Compatibility
- International:
- IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A
- Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
- Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.
- Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.
- Korea (KCC):
- Class A Equipment (Industrial Broadcasting & Communication Equipment)
- Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
- USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
- Enclosure protection: IEC 60529: IP40 (non-operating)
Safety
- IEC 61010-1: Pollution Degree 2
- IEC 61010-2-033: CAT IV 600 V / CAT III 1000 V
- Batteries: Four AA batteries (NEDA 15A or IEC LR6)
- Battery life: Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
- Size (H x W x L): 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
- Weight : 550 g (1.2 lb)
- Altitude:
- Operating: 2000 m
- Storage: 12,000 m
- Over-range capability: 110% of range except for capacitance which is 100%
- Frequency overload protection: <107 V Hz
- Fuse protection for mA input: 0.44A, 1000 V, IR 10 kA
- Fluke i400 AC Current Clamp
Specifications
- Nominal current range: 400 A
- Continuous current range: 1 A - 400 A
- Maximum non-destructive current: 1000 A
- Lowest measurable current: 1 A
- Basic accuracy:
- 2% + 0.06 A
- (45-400 Hz)
- (% reading + floorspec)
- Useable frequency: 5 Hz - 20 kHz
- Output level(s): 1 mA/A
Safety Specifications
- Safety: CAT IV 600 V, CAT III, 1000 V
- Maximum voltage: 1000 V AC rms from earth to ground, in compliance with EN61010
Mechanical and General Specifications
- Warranty: 1 year
- Maximum conductor diameter: 32 mm (1.25 in)
- Maximum conductor size (busbar): 750 MCM
- Output cable length: 1.5 m (59 in)
- Shrouded banana plugs: Yes
- Fluke 9040 Phase Rotation Indicator
Technical Specifications
- Voltage range: 40-700 V
- Frequency range: 15-400 Hz
- Operating timer: Continuous
Environmental Specifications
- Operating temperature: 0 °C to 40 °C
- Dust/water resistance: IP 40
Safety Specifications
- Electrical safety: EN 61010, EN 61557-7
- Overvoltage category:
- CAT III, 600 V
- CAT IV, 300V
Mechanical and General Specifications
- Size: 124 x 61 x 27 mm
- Weight: 200 g
- Power supply: From unit under test
- Warranty: 2 years
| Part No | FLU1587MDTFC |
|---|---|
| Barcode | 95969797283 |
| Brand | Fluke |
| Warranty | 2 Year |
| Net Weight (kg) | 3.2 |
| Product Length (mm) | 36 |
| Product Width (mm) | 28 |
| Product Height (mm) | 10 |