FLUKE 1000V 2500A AC/DC 376 FC True-RMS Clamp Meter FLU376FC
Pickup In Store
If you don't want to pay for delivery or need to ASAP, you can pick it up in store. Just bear in mind not all stores will have everything in stock. You'll be able to see if they do during the checkout process.
Free Delivery
Most products are included in free delivery, however some are excluded as follows:
- Orders and/or items under $99.
- Orders and/or items that are deemed bulky, large or heavy.
- Clearance items.
- Orders that include or items that are classed as dangerous goods.
- Remote areas are excluded from free delivery and you will either be charged delivery at checkout or may be contacted prior to delivery to confirm delivery charges if necessary.
- Interstate deliveries.
Total Tools reserve the right to change or withdraw free delivery at any time.
Estimated Delivery Timeframes
If you opted to collect in store you will receive an email to inform you when your goods are ready for collection.
If you opted for delivery, you will receive an email when the goods have been despatched to the couriers with details so you can track our order.
We aim to despatch all orders within 1-2 business days. In the unusual event of a delay to the despatch of your order you will be contacted at the earliest opportunity. Once the order has been despatched the estimated delivery time is as follows:
- Metro (Excludes Hobart Metro) 1-2 business days
- Hobart Metro 3-4 business days
- Regional Areas 3-4 business days
- Remote Areas 6-9 business days
Please note that these delivery timeframes are estimates and are not guaranteed.
Returns
Changed your mind? No worries. You just need to get the product back to the store it was shipped from (this is on your receipt) within 30 days, unused and in its original packaging and we'll give you a refund (excluding delivery costs). You can read our full returns & exchanges policy here (special order items are excluded from this returns policy).
Total Tools - Low Price Guarantee Policy (Terms & Conditions)
At Total Tools we offer Low Prices, every day, guaranteed. We will not be beaten!
We check our prices daily against our competitors to ensure you can shop online or instore with the confidence you are buying at the very best price, every day.
Should you find a lower advertised price for the identically stocked product elsewhere, we will happily match the price. [Subject to Terms & Conditions – see below for details]
At times prices have moved in the market, and our in store and online price for printed catalogue items may be lower. Check online or instore for the latest price.
How to Price Match
Simply fill in price match form available on every product page or visit a Total Tools Store. We will verify the price, and then immediately match any current advertised price (Terms & Conditions apply).
Terms & Conditions
For eligibility, the following terms and conditions need to be met;
- Product must be identical (same brand, colour, model #)
- Product must be currently advertised in print or electronic media (Including newspaper, catalogue, radio, television advertising or online)
- Product must be in stock at the competitor
- The competitors price of the product must be inclusive of delivery fees, taxes and charges
- The competitors price is lower than our price on the day the price guarantee is requested (day of purchase)
- The competitors price excludes finance, installation, bundling, rebates, cash back, coupon offers, loyalty rewards or free bonus goods.
- The competitor is located in Australia
The following exclusions apply;
- Trade/commercial quotes and/or large volume/bulk purchases
- Products for sale via auction, stock liquidations, fire sale, sale or clearance (including eBay, Amazon)
- Blemished, seconds, refurbished, damaged or ex demonstration stock
- Advertising errors where competitor has published a rectification notice
- Special event, club or membership offers, third party promotions or prices not available to the general public
- Special order products
Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice.
For Further Information
Further information may be obtained in-store at any of our stores nationwide or online at www.totaltools.com.au/price-match-guarantee. Alternatively, contact onlinesupport@totaltools.com.au.
Key features
- Connect your meter to your smartphone with Fluke Connect Measurements
- Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
- Record results directly to your phone and the Cloud
- Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC
- Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls
- iFlex flexible current probe expands the measurement range to 2500 A ac; provides access to large conductors in tight spaces (included)
- TPAK magnetic hanging strap (included)
- Integrated VFD low pass filter for accurate motor drive measurements
- Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
- CAT IV 600 V, CAT III 1000 V safety rating
- Three-year warranty
- Soft carrying case
Measurement Capability
- 1000 A ac and dc current measurement
- 2500 A ac current measurement with iFlex flexible current probe
- 1000 V ac and dc voltage measurement
- True-rms voltage and current for accurate measurements on non-linear signals
- Frequency measurement to 500 Hz with body jaw and iFlex
- Resistance measurement to 60 kΩ with continuity detection
- Min, max, average, and inrush recording to capture variations automatically
- 500 mV dc measurement range to interface with other accessories
- 1000 μF capacitance measurement
Specifications:
- General Specifications
- AC Current via Jaw:
- Range: 999.9 A
- Resolution: 0.1 A
- Accuracy:
- 2% ±5 digits (10 Hz to 100 Hz)
- 2.5% ±5 digits (100-500 Hz)
- Crest Factor (50 Hz/60 Hz):
- 3 @ 500 A
- 2.5 @ 600 A
- Add 2% for C.F. >2
- AC Current via Flexible Current Probe
- Range: 2500 A
- Resolution:
- 0.1 A (≤ 600 A)
- 1 A (≤ 2500 A)
- Accuracy: 3% ±5 digits (5 – 500 Hz)
- Crest Factor (50/60Hz):
- 3.0 at 1100 A
- 2.5 at 1400 A
- 1.42 at 2500 A
- Add 2% for C.F. > 2
- Position Sensitivity
- i2500-10 Flex
- A.
- Distance from Optimum: 0.5 in (12.7 mm)
- Error: ±0.5 %
- B.
- Distance from Optimum: 0.8 in (20.3 mm)
- Error: ±1.0 %
- C.
- Distance from Optimum: 1.4 in (35.6 mm)
- Error: ±2.0 %
- A.
- i2500-18 Flex
- A.
- Distance from Optimum: 1.4 in (35.6 mm)
- Error: ±0.5 %
- B.
- Distance from Optimum: 2.0 in (50.8 mm)
- Error: ±1.0 %
- C.
- Distance from Optimum: 2.5 in (63.5 mm)
- Error: ±2.0 %
- A.
- i2500-10 Flex
*Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range.
- DC Current
- Range: 600.0 A
- Resolution: 0.1 A
- Accuracy: 2% ±5 digits
- AC Voltage
- Range: 1000 V
- Resolution:
- 0.1 V (≤600.0 V)
- 1 V (≤1000 V)
- Accuracy: 1.5% ±5 digits (20 Hz to 500 Hz)
- DC Voltage
- Range: 1000 V
- Resolution:
- 0.1 V (≤600.0 V)
- 1 V (≤1000 V)
- Accuracy: 1% ±5 digits
- mV dc
- Range: 500.0 mV
- Resolution: 0.1 mV
- Accuracy: 1% ±5 digits
- Frequency via Jaw
- Range: 5.0 Hz to 500.0 Hz
- Resolution: 0.1 Hz
- Accuracy: 0.5% ±5 digits
- Trigger level:
- 5 Hz to 10 Hz, ≥10 A
- 10 Hz to 100 Hz, ≥5 A
- 100 Hz to 500 Hz, ≥10 A
- Frequency via Flexible Current Probe
- Range: 5.0 Hz to 500.0 Hz
- Resolution: 0.1 Hz
- Accuracy: 0.5% ±5 digits
- Trigger level:
- 5 Hz to 20 Hz, ≥25 A
- 20 Hz to 100 Hz, ≥20 A
- 100 Hz to 500 Hz, ≥25 A
- Resistance
- Range: 60 kΩ
- Resolution:
- 0.1 Ω (≤600 Ω)
- 1 Ω (≤6000 Ω)
- 10 Ω (≤60 kΩ)
- Accuracy: 1% ±5 digits
- Capacitance
- Range: 1000 μF
- Resolution:
- 0.1 μF (≤ 100 μF)
- 1 μ F (≤ 1000 μF)
- Accuracy: 1% ±4 digits
- Mechanical Specifications:
- Maximum voltage between any terminal and earth ground: 1000 V
- Batteries: 2 AA, NEDA 15A, IEC LR6
- Operating temperature: -10 °C to +50 °C
- Storage temperature: -40 °C to +60 °C
- Operating humidity - non-condensing (< 10°C):
- ≤90% RH (at 10 °C to 30 °C)
- ≤75% RH (at 30 °C to 40 °C)
- ≤45% RH (at 40 °C to 50 °C)
- Operating altitude: 2000 m
- Storage altitude: 12,000 m
- Size (L x W x H): 249 x 85 x 45 mm
- Weight: 395 g
- Jaw opening: 34 mm
- Flexible current probe diameter: 7.5 mm
- Flexible current probe cable length(head to electronics connector): 1.8 m
- Safety:
- IEC 61010-1, Pollution Degree 2
- IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V
- IEC 61010-2-033:CAT III 1000 V / CAT IV 600 V
- IP rating: IEC 60529: IP30, non-operating
- Radio Frequency Certification FCC ID: T68-FBLE IC:6627A-FBLE
- Electromagnetic Compatibility (EMC)
- International:
- IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2
- CISPR 11: Group 1, Class A
- Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
- Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purpose. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.
- Korea (KCC):
- Class A Equipment (Industrial Broadcasting & Communication Equipment)
- Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
- USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
- Temperature coefficients: Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C
Part No | FLU376FC |
---|---|
Barcode | 95969798396 |
Brand | Fluke |
Net Weight (kg) | 0.4 |
Product Length (mm) | 249 |
Product Width (mm) | 85 |
Product Height (mm) | 45 |