TITEBOND 473mL Original Wood Glue TBD-1-473ML

SKU
..113228
MPN TBD-1-473ML
In Stock
Rating:
98% of 100
$1380
  • BULK BUYS
  • Buy 3 for $13 each and save 5%
  • Buy 12 for $1095 each and save 20%
 

GET TO WORK NOW, PAY LATER Click to see your options

Paypal
Available for orders between $30 - $2,000
Zip
Available for orders up to $5,000
Afterpay
Love tools? Start earning points to redeem rewards on your next purchase Log in or Sign Up to redeem today!
Product Review Winner
Top 100 Relailer
30 Day Online Returns' with 'Australia's largest professional tool retailer

Titebond Original is the fastest setting, high-quality aliphatic resin emulsion adhesive. It dries very rapidly to give a short clamp time and has high solvent-resistance. Original is excellent for sandable general-purpose assembly for particle board, MDF, plywood, and other porous materials as well as edge and face gluing of hardwoods and softwoods. It is preferred by musical instrument makers around the world.

  • Fast set – Shortens clamp time
  • Bonds stronger than wood
  • Minimal or no creep
  • Solvent-resistant
  • Excellent standability
  • Unaffected by finishes
  • Easy cleanup with water
  • FDA approved for indirect food contact
  • Perfect for an assembly where short cure and open time is desired

Specifications

  • Type: Aliphatic resin emulsion
  • State: Liquid
  • Colour: Yellow
  • Dried film: Translucent
  • Solids: 46%
  • Viscosity: 3,200 cps
  • Storage life: 24 months in tightly closed containers at 24°C
  • Calculated VOC: 10.7 g/L
  • Weight per gallon: 4.17kg
  • Chalk temperature: Approximately 10°C
  • Flashpoint: > 93°C
  • Freeze/thaw stability: Stable
  • pH: 4.0

*Chalk temperature indicates the lowest recommended temperature at which the glue, air, and materials can be during the application, to assure a good bond.

Application Guidelines

  • Application Temperature: Above 10°C.
  • Open Assembly Time: 4-6 minutes (21°C./50%RH)
  • Total Assembly Time: 10-15 minutes (21°C./50%RH)
  • Minimum Required Spread: Approximately 6 square meters per Litre
  • Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
  • Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
  • Cleanup: Damp cloth while the glue is wet. Scrape off and sand dried excess.

Limitations

Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load-bearing applications. Do not use when temperature, glue or materials are below 10°C. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore the product to the original form. Read Safety Data Sheet before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to the Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Specification
Brand TITEBOND
Part No TBD-1-473ML
Barcode 037083050646

Reviews

Write Your Own Review